High Capacity Roller Veneer Dryer
Shine's new 2 layers 56-meter roller veneer dryer has been successfully installed and put into production in Kalasin Province, Thailand. This dryer is equipped with a semi-automatic feeding system and employs manual veneer collection, with a working width designed at 3.75 meters, which significantly enhancing the overall production capacity, with a daily output of 150m3. Moreover, a 10-ton biomass burner serves as the heat source, utilizing waste wood as fuel, which greatly reduces operational costs and improves resource utilization for the customer.
Product Details
The customer is highly satisfied with the output and quality of Shine's veneer dryer and has already planned with Shine factory for the installation of a second unit. Shine has always been committed to saving costs for customers while ensuring product quality. Currently, Shine's dryers hold a significant market share in Thailand, and the company is fully capable of providing local technical support and after-sales service. More case sites are open for visits by potential customers.
Model No | GTH375-56 |
Working Width | 3.75m |
Deck | 2 |
Roller material | Q235B, φ 89 special shaft tube |
Heating area length | 52m |
Cooling area length | 4m |
Veneer thickness and size | 1.7-2mm (4ft size) |
Veneer water moisture | Fresh Veneers to about 0-12% |
Heating material | 10Ton Biomass Burner |
Drying capacity (m³/day) | About 115m3 (with 24 working hours) |
Veneer transport speed | 5-22m/min, 16A chain |
Power of Hot Air Blower | 5.5KW (13pc) |
Power of Traction Motor | 7.5KW, frequency control (2pc) |
Power of Cold air blower | 5.5KW (1pc) |
Power of Biomass Burner (12Ton) | 16.5KW |
Power of Intake Air Fan | 11KW (2pc) |
Total Power | 130.5KW |
Actual electricity consumption | About 80 kwh per hour |
Overall Dimension(L*W*H) | 60m×8m×3m |
Send your message to us
Related News
Submitted successfully
We will contact you as soon as possible
Close